In modules of 2, 3, 4 or 6 pieces in solid chestnut, create your storage space according to your desires and your spaces.
Of different sizes and depths, each of the shelves will be perfect for holding books, small decorations, toys, etc. They will fit into a living room, bedroom or hallway, and will be just as popular with children as with adults!
Installation is made easy with a simple and fun assembly guide. Find our installation video tutorial here !
The Firmin are produced in small series.
They are manufactured, assembled and stored in Normandy by us.
The manufacturing process is available on our Instagram: gllu._
Oiled Norman chestnut
48 x 22 x 22 cm
35 x 16 x 10 cm
32 x 18 x 10 cm
25 x 18 x 20 cm
22 x 8 cm
16x8
+ Screws and dowels are provided for fixing Firmin shelves
To help you install Firmin shelves, we advise you to use the cutting templates provided with them. By cutting them out, they will allow you to visualize where to place your shelves and where to drill.
1) Cut out the shelf templates following the dotted lines.
2) Use these to define the location of your shelves, by positioning them on the wall (scotch tape or patafix). You can check the horizontality with a spirit level.
3) On a placo, concrete, or brick wall, drill holes 6 mm in diameter and 4 cm deep in the locations defined on the templates. Unhook the templates. Slide the dowels in using the hammer then position the screws so as to leave a space of 4 mm between the screw head and the wall.
4) a. The shelves having the two screws aligned on the horizontal part: position the shelf on the screws and slide it to the left to fix them, as indicated on each template.
4) b. Shelves having one screw on the horizontal part and one at the top of the vertical part: insert the shelf first into the bottom screw, slide to the left then rotate to be able to insert the shelf into the screw on the bottom. top, as indicated on each template.
If the shelves are not held well or are too hard to insert, tighten or loosen the screw to have the optimal space between the screw head and the wall.
5) To remove them, simply do the reverse.
