HANGING BAR – 3 lengths: 50 cm, 80 cm and 120 cm
A revisited wardrobe classic. A wardrobe suspended from the ceiling, held by thin steel wires, which gives the impression of floating.
The light and airy rendering gives an impression of space, unlike imposing dressing rooms and chests of drawers.
Alone or stacked, the Hanging Bars will look great on a large section of wall, a small corner of a room, an entrance, etc.
Installation is easily done on the ceiling with the provided fasteners and our installation guide .
The Suspended Bars are produced in small series.
They are manufactured, assembled and stored in Normandy by us.
The manufacturing process is accessible on our Instagram: gllu._
Oiled Norman chestnut
Small model: 50 x 2.8 x 2.8 cm
Medium model: 80 x 2.8 x 2.8 cm
Large model: 120 x 2.8 x 2.8 cm
+ The ceiling suspension system is provided for attaching the Hanging Bar.
Check the nature of your ceiling, we will provide you with the hardware suitable for solid and placo ceilings.
The hanging bar can support up to 10 kg of load.
An illustrated guide can be downloaded in the Description tab.
1) On the ceiling, using a pencil, define a first drilling point.
2) From this first point, mark the other holes respecting the following spacing:
– For the 50 cm hanging bar: → 40 cm
– For the 80 cm hanging bar: → 70 cm
– For the 120 cm hanging bar: → 110 cm
3) Drill holes 6 mm in diameter and 4 cm deep at the defined locations.
4) Insert the dowels and screw the fixing into the holes.
5) Define the height of the Bar by adjusting the length of the wires. Just pull and it locks automatically. Once the 2 wires are correctly adjusted, cut the excess wire using cutting pliers. You can check that the Bar is straight using a spirit level.
